fuse holder sentence in Hindi
Sentences
Mobile
- A lamp base is too short to contact the bottom terminal of a fuse holder.
- This quenches any arc in the fuse holder.
- Traditional diazed fuse holders are made as a conducting metal envelope covered with non-conducting porcelain cover.
- Put a replacement fuse into your new fuse holder and plug the dead fuse into the car.
- IEC standards refer to a " fuse " as the assembly of a fuse link and fuse holder.
- Some are time delayed, slow reacting, or have leads for terminals used in circuits without a fuse holder.
- Blade type fuses often require the use of a special purpose extractor tool to remove them from the fuse holder.
- It may happen if a fuse holder was accidentally dropped or someone was using too much force to screw it in.
- However it's possible ( but not useful ) to screw a DII fuse holder without a fuse in an E27 lamp holder.
- The removable part of the fuse holder has a small window to allow inspection of the indicator without removal of the fuse.
- By the 1920s, battery holders used twin metal clips ( like fuse holders ) to hold the battery in place while making electrical contact.
- The fixed part of the fuse holder contains a ( usually colour-coded ) gauge ring, which will accept end caps up to a certain diameter.
- In IEC standards, the replaceable element is called a " fuse link " and the assembly of fuse link and fuse holder is called a " fuse ".
- A few workers toss threaded plastic rings, fuse holders and orange tabs into boxes for eventual hand-over to the government required under a recent ban on mines passed by Parliament.
- When the fuse blows, the released spring pulls the stub of the fuse link out of the fuse holder tube to reduce surge duration and damage to the transformer and fuse holder.
- When the fuse blows, the released spring pulls the stub of the fuse link out of the fuse holder tube to reduce surge duration and damage to the transformer and fuse holder.
- Power entry modules are also available rated as water resistant at IP65, with seal protection at the panel opening, around the fuse holders when provided, and between the inlet housing and connector pins.
- Cutouts are typically mounted about 20 degrees off vertical so that the center of gravity of the fuse holder is displaced and the fuse holder will rotate and fall open under its own weight when the fuse blows.
- Cutouts are typically mounted about 20 degrees off vertical so that the center of gravity of the fuse holder is displaced and the fuse holder will rotate and fall open under its own weight when the fuse blows.
- For example, fuse holders for North American class RK fuses have a pin that prevents installation of similar-appearing class H fuses, which have a much lower breaking capacity and a solid blade terminal that lacks the slot of the RK type.
- More Sentences: 1 2
fuse holder sentences in Hindi. What are the example sentences for fuse holder? fuse holder English meaning, translation, pronunciation, synonyms and example sentences are provided by Hindlish.com.